View FTM-9423P-KGHG_4531757.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

May 15, 2007
SFF GPON ONT Diplexer
FTM-9423P(T)-K(F)GH(i)G
(ITU-T Rec.G.984.2)
Members of FlexonTM Family
Standard
Compliant with ITU-T G.984.2, G.984.2 Amendment 1 Compliant with FCC 47 CFR Part 15, Class B Compliant with FDA 21 CFR 1040.10 and 1040.11, Class I
Description
FTM-9423P(T)-K(F)GH(i)G is Optical Network Terminal (ONT) diplexer for 1244/2488M Class B+ application in ITU-T Rec.G.984.2 and G.984.2 Amendment 1. fiber bi-directional data links with The diplexers are the high performance modules for 1244/2488M data link in single fiber by using 1310nm burst mode transmitter and 1490nm continuous mode receiver with 1550nm optical signal rejection. The transmitter section uses a multiple quantum well 1310nm DFB laser, which is Classlaser compliant product according to international safety standard IEC-60825. The receiver section uses an integrated 1490nm APD and preamplifier mounted in an optical header and limiting post-amplifier IC. The optical burst output can be enabled by a LVTTL logic high-level input of TX_BRST. Signal Detected (SD) output is provided to indicate the detection of an input optical signal of receiver. The Digital diagnostic monitoring interface is
Features
Single asymmetric 1244Mbit/s upstream and 2488Mbit/s downstream Integrated with micro-optics WDM filter for dual wavelength Tx/Rx operation at 1310/1490nm Burst mode operation transmitter with 1310nm DFB laser Power levelling mechanism(for 2x10 SFF) Continuous mode operation receiver with 1490nm high sensitivity APD-TIA with 1550nm optical signal rejection Different operating case temperature class 0 to 70 Standard Class -40 to 85 Industrial Class 2x5 and 2x10 SFF package SC/UPC or SC/APC connector Single 3.3V power supply LVPECL data input interface and CML data output interface LVTTL transmitter burst-mode control LVTTL receiver signal-detected indication Low EMI and excellent ESD protection Class I laser safety standard IEC-60825 compliant
incorporated into the 2x10 SFF transceivers and allows real time access to the transceiver operating parameters such as power supply, operating temperature, laser bias current, receiver optical power by reading a built-in memory with I2C interface.
Applications
Gigabit-capable Passive Optical Networks(GPON) ONT with video-overlay
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
Page 1 of 17
SFF GPON ONT Diplexer Class B+ attenuation range: 13-28dB
Document Confidential Level: In public
FTM-9423P(T)-K(F)GH(i)G Preliminary Data Sheet May. 15, 2007
Template ver. 1e
Regulatory Compliance
The transceivers have been tested according to American and European product safety and electromagnetic compatibility regulations (See Table 1). For further information regarding regulatory certification, please refer to FlexonTM regulatory specification and safety guidelines, or contact with Fiberxon, Inc. America sales office listed at the end of documentation. Table 1 - Regulatory Compliance
Feature Electrostatic Discharge (ESD) to the Electrical Pins Electromagnetic Interference (EMI) Immunity Laser Eye Safety Component Recognition MIL-STD-883E Method 3015.7 FCC Part 15 Class B EN55022 Class B (CISPR 22B) VCCI Class B IEC 61000-4-3 FDA 21CFR 1040.10 and 1040.11 EN60950, EN (IEC) 60825-1,2 UL and CSA Compliant with standards Compliant with Class I laser product Compliant with standards Compliant with standards Standard Performance Class (>500 V)
RoHS
2002/95/EC 4.1&4.2
Compliant with standards
Absolute Maximum Ratings
Absolute Maximum Ratings are those values, beyond which, some damages may occur to the devices. Exposure to conditions above the Absolute Maximum Ratings listed in Table 2 may negatively impact the reliability of the products. Table 2 - Absolute Maximum Ratings
Parameter Storage Ambient Temperature Operating Case Temperature (Note) Operating Humidity Power Supply Voltage Input Voltage Receiver Damaged Threshold Soldering Temperature Bending Radius 30 Symbol TSTG TC HOPR VCC Min. -40 0 -40 5 0 GND 0 260/10 Max. 85 70 85 95 4 Vcc Unit C C % V V dBm C/s mm FTM-9423P(T)-K(F)GHG FTM-9423P(T)-K(F)GHiG Note
Note: Refer to temperature testing area marked in Figure 6
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
Page 2 of 17
SFF GPON ONT Diplexer Class B+ attenuation range: 13-28dB
Document Confidential Level: In public
FTM-9423P(T)-K(F)GH(i)G Preliminary Data Sheet May. 15, 2007
Template ver. 1e
Recommended Operating Conditions
Table 3 - Recommended Operating Conditions
Parameter Power Supply Voltage Operating Case Temperature Operating Humidity Data Rate(Upstream/Downstream) Consecutive Identical Digital Immunity 72 Symbol VCC TC HOPR Min. 3.13 0 -40 5 1244.16/2488.32 Typ. Max. 3.47 70 85 95 Unit V C % Mbit/s Bit 3.3V5% FTM-9423P(T)-K(F)GHG FTM-9423P(T)-K(F)GHiG Note
Optical and Electrical Characteristics
Table 4- Transmitter Optical and Electrical Characteristics FTM-9423P(T)-K(F)GHG FTM-9423P(T)-K(F)GHiG
Parameter Optical Center Wavelength Optical Spectrum Width(-20dB) Side Mode Suppression Ratio Average Launch Power (mode 0) Average Launch Power (mode 1) Average Launch Power (mode 2) Average Launch Power-OFF Transmitter Extinction Ratio Burst Turn On Time Burst Turn Off Time Transmitter Reflectance Tolerance to Transmitter Incident Light Power Optical Penalty Optical Eye Diagram Data Input Differential Swing Common-Mode Input Voltage Input Differential Impedance Power Supply Current Transmitter Burst Control Voltage - Low Transmitter Burst Control Voltage - High VIN VCM ZIN ICC_TX VBURST, L VBURST, H 0 2.0 200 Vcc-1.49 90 Vcc-1.32 100 -15 0.5 Compliant With ITU-T G984.2 1600 Vcc-VIN/4 110 250 0.8 VCC mV V mA V V 6 5 POFF ER TON TOFF 10 12.8 12.8 -10 POUT
(0C Symbol C SMSR 30 +0.5 -2.5 -5.5 2 +5 +2 -1 -45 dBm dB ns ns dB dB dB 2,4 2 3 dBm 1 Min. 1260 Typ. Max. 1360 1 Unit nm nm Note
Note 1: Launched into 9/125um SMF, mode 1, 2 are implemented by power leveling mechanism in 2x10 SFF Note 2: Measured with PRBS 223-1 plus 72bits CID test pattern @1244.16Mbit/s, and the Bessel-Thompson filter is turned on. Note 3: Refer to Timing Parameter Definition in Burst Mode Sequence Note 4: Transmitter eye mask definition is shown as below.
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 3 of 17
SFF GPON ONT Diplexer Class B+ attenuation range: 13-28dB
Document Confidential Level: In public
FTM-9423P(T)-K(F)GH(i)G Preliminary Data Sheet May. 15, 2007
Template ver. 1e
1244.16Mbit/s x1/x4 x2/x3 y1/y4 y2/y3 0.22/0.78 0.40/0.60 0.17/0.83 0.20/0.80
Note 5: Compatible with LVPECL input (See Recommended Interface Circuit) Note 6: TX_BRST (See Pin Function Definitions) Table 5 - Receiver Optical and Electrical Characteristics FTM-9423P(T)-K(F)GHG FTM-9423P(T)-K(F)GHiG
Parameter Operating Wavelength Sensitivity Overload Signal-Detected Assert Level Signal-Detected Deassert Level Signal-Detected Hysteresis Tolerance to Reflected Optical Power Receiver Reflectance Power Supply Current Data Output Differential Swing Signal-Detected Voltage - Low Signal-Detected Voltage - High Signal-Detected Assert Time Signal-Detected Deassert Time
23
(0C Symbol PSEN POV PSDA PSDD PSDA- PSDD -39 0.5 6 10 -20 ICC_RX VOUT VSD, L VSD, H TASS TDAS 400 0 2.4 150 1000 0.4 VCC 100 100 -7 -30 Min. 1480 Typ. 1490 -31 Max. 1500 -29 Unit nm dBm dBm dBm dB dB dB mA mV V V s s 4 5 1 2 3 Notes
Note 1: Measured with PRBS 2 -1 plus 72bits CID test pattern @2488.32Mbit/s 1310nm, ER=10dB, BER =10-10 Note 2: An increase in optical power above the specified level will cause the Signal Detect output to switch from a low state to a high state. Note 3: A decrease in optical power below the specified level will cause the Signal Detect output to switch from a high state to a low state. Note 4: CML output, AC coupled internally, guaranteed in the full range of input optical power (See Recommended Interface Circuit) Note 5: SD (See Pin Function Definitions)
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
Page 4 of 17
SFF GPON ONT Diplexer Class B+ attenuation range: 13-28dB
Document Confidential Level: In public
FTM-9423P(T)-K(F)GH(i)G Preliminary Data Sheet May. 15, 2007
Template ver. 1e
Optical Signal (1-Level)
Optical Signal Output (at ONT side)
TON TOFF
Optical Signal (0-Level) Dark Level
Upstream Data (TD+/TD- at ONT side)
Tx_BRST (at ONT side)
Figure 1 Timing Parameter Definition in Burst Mode Sequence
Recommended Interface Circuit
Figure 2 shows the recommended interface scheme for FTM-9423P(T)-FGH(i)G
VEET(7)
+3.3V
2 X 1H 10F 0.1F 10F 0.1F
0.1F
FTM-9423P(T)-FGH(i)G
VCCT(6) VCCR(2)
+3.3V
10K
PON_TX_DISABLE
VEER(1) TX_BRST(8)
+3.3V
Z=50 TXP Z=50 TXN 130 TD+(9) TD-(10) 82 82 130
Laser Driver (BM)
G-PON MAC
SerDes
82 RXN 82
+3.3V
Z=50 Z=50 RD-(4) RD+(5)
LIA(CM)
RXP 130 130
+3.3V
PON_LOS SD(3) 10K
Figure 2 Recommended Interface Circuit for FTM-9423P(T)-FGH(i)G
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 5 of 17
SFF GPON ONT Diplexer Class B+ attenuation range: 13-28dB
Document Confidential Level: In public
FTM-9423P(T)-K(F)GH(i)G Preliminary Data Sheet May. 15, 2007
Template ver. 1e
Figure 3 shows the recommended interface scheme for FTM-9423P(T)-KGH(i)G
Figure 3 Recommended Interface Circuit FTM-9423P(T)-KGH(i)G
Pin Definitions
2x5/2x10 SFF planform in Figure 4 below shows the pin information of electrical interface and mounting studs. Functions are described in Table 6 and Table 7 with some accompanying notes.
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
Page 6 of 17
SFF GPON ONT Diplexer Class B+ attenuation range: 13-28dB
Document Confidential Level: In public
FTM-9423P(T)-K(F)GH(i)G Preliminary Data Sheet May. 15, 2007
Template ver. 1e
Figure 4 2x5/2x10 SFF Planform Table 6 - Pin Function Definitions (2x5 SFF)
Pin No. 1 2 3 4 5 6 7 8 9 10 F Name VEER VCCR SD RDRD+ VCCT VEET TX_BRST TD+ TDMS Description Receiver Signal Ground Receiver Power Supply Receiver Signal-Detected Indication Inverted Receiver Data Output Non-inverted Receiver Data Output Transmitter Power Supply Transmitter Signal Ground Transmitter Burst Control Transmitter Non-inverted Data Input Transmitter Inverted Data Input Mounting Studs 3 4 5 1 2 Notes
Table 7 - Pin Function Definitions (2x10 SFF)
Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Name NC VEER VEER NC NC VEER VCCR SD RDRD+ VCCT VEET TX_BRST TD+ TDVEET SCL Description No Function Definition Receiver Signal Ground Receiver Signal Ground No Function Definition No Function Definition Receiver Signal Ground Receiver Power Supply Receiver Signal-Detected Indication Inverted Receiver Data Output Non-inverted Receiver Data Output Transmitter Power Supply Transmitter Signal Ground Transmitter Burst Control Transmitter Non-inverted Data Input Transmitter Inverted Data Input Transmitter Signal Ground Clock Line of the I2C interface 6
Page 7 of 17
Notes Not connected
Not connected Not connected
1 2
3 4
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
SFF GPON ONT Diplexer Class B+ attenuation range: 13-28dB
Document Confidential Level: In public
FTM-9423P(T)-K(F)GH(i)G Preliminary Data Sheet May. 15, 2007
Template ver. 1e
18 19 20 F
SDA RESET VEET MS
Data Line of the I C interface Reset Input to Microprocessor Transmitter Signal Ground Mounting Studs
2
6 7 5
Note 1: LVTTL logic output, with internal 10K pull-up resistor. Optical Signal-Detected: High; Optical Signal Loss: Low Note 2: CML logic output, AC coupled internally. (See Recommended Interface Circuit) Note 3: A positive level enable optical signal output under burst mode. (See Timing Parameter Definition in Burst Mode Sequence) Note 4: Compatible with LVPECL input, DC coupled internally (See Recommended Interface Circuit) Note 5: The mounting studs are provided for transceiver mechanical attachment to circuit board. They may also provide an optional connection of the transceiver to the equipment chassis ground. The holes in the circuit board must be tied to chassis ground. It is not recommended that the mounting studs be connected to signal ground. Note 6: I2C interface, they should be pulled up with two 4.7-10K resistors on the host board. Note 7: LVTTL reset input to microprocessor, with internal 10K pull-up resistor, active low.
Mechanical Design Diagram
The form factor is 2x5/2x10 SFF with pigtail fiber. The pigtail fiber length is 520 - 550mm and its minimum bending radius is 30mm. The fiber connector type is SC/UPC or SC/APC. The mechanical design diagram is shown in Figure 5 and Figure 6. (Dimension in mm)
5.110.05 10.16
24.89
19.56
00 10- 0.50 -0.05
12.750.1
4.80.3
2.850.3
3.70.1
1.778
2- 1 4X1.778(=7.112)
520~550
49.560.1 13.40.1
11.380.5
Label
Case Temperature Testing Point
Figure 5 Mechanical Design Diagram (2x5 SFF)
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 8 of 17
0.9
Max40mm
SFF GPON ONT Diplexer Class B+ attenuation range: 13-28dB
Document Confidential Level: In public
FTM-9423P(T)-K(F)GH(i)G Preliminary Data Sheet May. 15, 2007
Template ver. 1e
13.110.05 10.16
16.89
19.56
00 20- 0.45 -0.05
12.750.1
4.80.3
2.850.3
3.70.1
1.778
2- 1 9X1.778(=16.002)
520~550
49.560.1 13.40.1
11.380.5
Label
Case Temperature Testing Point
Figure 6 Mechanical Design Diagram (2x10 SFF) Table 8 - Pigtail Fiber Characteristics
Parameter Mode Field Diameter Cladding Diameter Jacket Diameter Bending Radius of Pigtail Fiber Tension Force on Pigtail Fiber Pigtail Fiber Length Optical Return Loss (UPC type) -1310nm Optical Return Loss (APC type) -1310nm 520 50 60 30 1 550 Min. Typical 9 125 0.9 Max. Unit m m mm mm Kg mm dB dB
0.9
Max40mm
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
Page 9 of 17
SFF GPON ONT Diplexer Class B+ attenuation range: 13-28dB
Document Confidential Level: In public
FTM-9423P(T)-K(F)GH(i)G Preliminary Data Sheet May. 15, 2007
Template ver. 1e
EEPROM Information
The SFF-8472 defines a 256-byte memory map in EEPROM describing the transceiver's capabilities, standard interfaces, manufacture, and other information, which is accessible over 2 wire interface at the 8-bit address 1010000X(A0h). The memory contents refer to Table 9. Table 9 - EEPROM Serial ID Memory Contents (A0h)
Addr. 0 1 2 3-10 11 12 13 14 15 16 17 18 19 20-35 36 37-39 Field Size (Bytes) 1 1 1 8 1 1 1 1 1 1 1 1 1 16 1 3 Name of Field Identifier Ext. Identifier Connector Transceiver Encoding BR, Nominal Reserved Length (9um)-km Length (9um) Length (50um) Length (62.5um) Length (Copper) Reserved Vendor name Reserved Vendor OUI 02 04 0B XX XX XX XX XX XX XX XX 03 0C 00 14 C8 00 00 00 00 46 49 42 45 52 58 4F 4E 20 49 4E 43 2E 20 20 20 00 00 00 00 46 54 4D 39 34 32 33 50(54) 40-55 16 Vendor PN 4B(46) 47 48 47 20 20 20 20 46 54 4D 39 34 32 33 50(54) 4B(46) 47 48 69 47 20 20 20 56-59 60-61 62 63 64-65 66 67 68-83 84-91 4 2 1 1 2 1 1 16 8 Vendor Rev Wavelength Reserved CC_BASE Options BR, max BR, min Vendor SN Date code XX XX 20 20 05 1E 00 XX 00 06 00 00 XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX 20 20 ASCII Year(2 bytes),Month(2 bytes),Day(2 bytes) Check sum of byte 0-62 SD,LAS_FAIL and TX_DISABLE "FTM-9423P(T)-K(F)GHG" (ASCII) "FTM-9423P(T)-K(F)GHiG" (ASCII) ASCII("31 30 20 20" means 1.0 Revision) 1310nm Laser Wavelength "FIBERXON INC." (ASCII) 20(km) 200(100m) Not Support MMF Not Support MMF Not Support Copper Hex SFF Tranceiver MOD4 Optical pigtail (Transmitter Code, not defined for GPON) NRZ 1.244Gbps transmission Description
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
Page 10 of 17
SFF GPON ONT Diplexer Class B+ attenuation range: 13-28dB
Document Confidential Level: In public
FTM-9423P(T)-K(F)GH(i)G Preliminary Data Sheet May. 15, 2007
Template ver. 1e
Compliant with SFF-8472 V9.5 92 1 Diagnostic Monitoring Type Enhanced Options SFF-8472 Compliance CC_EXT Vendor Specific 68 Internally Calibrated Received power measurement type -Average Power 93 94 95 96-255 1 1 1 164 80 02 XX Diagnostics (Optional Alarm/warning flags) Diagnostics Compliance(SFF-8472 V9.5) Check sum of byte 64-94
Monitoring Specification
The digital diagnostic monitoring interface defines 256 bytes memory map in EEPROM, which makes use of the 8 bit address 1010001X(A2h). Please see Figure 7. Table 10~12 show the EEPROM definition from 0 to 119 byte, please refer to the SFF-8472 Rev 9.5 for the data format of these tables. The monitoring specification of this product is described in Table 13.
Figure 7 EEPROM Memory Map Specific Data Field Descriptions Table 10 - EEPROM Serial ID Memory of the Alarm and Warning Thresholds Contents in A2h
Addr. 00-01 02-03 04-05 Field Size (Bytes) 2 2 2 Name of Field Temp High Alarm Temp Low Alarm Temp High Warning Hex XX XX XX XX XX XX
Page 11 of 17
Description Based on difference operation case temperature class product
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
SFF GPON ONT Diplexer Class B+ attenuation range: 13-28dB
Document Confidential Level: In public
FTM-9423P(T)-K(F)GH(i)G Preliminary Data Sheet May. 15, 2007
Template ver. 1e
06-07 08-09 10-11 12-13 14-15 16-17 18-19 20-21 22-23 24-31 32-33 34-35 36-37 38-39 40-55
2 2 2 2 2 2 2 2 2 8 2 2 2 2 24
Temp Low Warning Voltage High Alarm Voltage Low Alarm Voltage High Warning Voltage Low Warning Bias High Alarm Bias Low Alarm Bias High Warning Bias Low Warning Reserved RX Power High Alarm RX Power Low Alarm RX Power High Warning RX Power Low Warning Reserved
XX XX 94 70 6D 60 8C A0 75 30 75 30 05 DC 61 A8 07 D0 00 00 0F 8D 00 0A 0C 5A 00 0C 00 00 -4dBm -30dBm -5dBm -29dBm 0 3.8 V 2.8 V 3.6 V 3.0 V 60 mA 3 mA 50 mA 4 mA
Table 11 - EEPROM Serial ID Memory of the Calibration Constants Contents in A2h
Addr. 56-59 60-63 64-67 68-71 72-75 76-77 78-79 80-81 82-83 84-85 86-87 88-89 90-91 92-94 95 Field Size (Bytes) 4 4 4 4 4 2 2 2 2 2 2 2 2 3 1 Name of Field Rx_PWR(4) Rx_PWR(3) Rx_PWR(2) Rx_PWR(1) Rx_PWR(0) Tx_I(Slope) Tx_I(Offset) Tx_PWR(Slope) Tx_PWR(Offset) T (Slope) T (Offset) V (Slope) V (Offset) Reserved Checksum Hex 00 00 00 00 00 00 00 00 00 00 00 00 3F 80 00 00 00 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00 00 00 00 XX Description 0 0 0 1 0 1 0 1 0 1 0 1 0 0 Check sum of byte 0-94
Table 12 - EEPROM Serial ID Memory of the A/D Values and Status Bits Contents in A2h
Addr. 96-97 98-99 100-101 102-103 Bit 7-0 7-0 7-0 7-0 Name of Field Temperature VCC TX Bias Reserved Hex XX XX XX XX XX XX XX XX
Page 12 of 17
Description
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
SFF GPON ONT Diplexer Class B+ attenuation range: 13-28dB
Document Confidential Level: In public
FTM-9423P(T)-K(F)GH(i)G Preliminary Data Sheet May. 15, 2007
Template ver. 1e
104-105 106-109 110 110 110 110 110 110 111 111 112 112 112 112 112 112 112 113 113 113 114-115 116 116 116 116 116 116 116 117 117 117 118-119
7-0 7-0 7 6 5~3 2 1 0 7-2 1-0 7 6 5 4 3 2 1-0 7 6 5-0 7-0 7 6 5 4 3 2 1-0 7 6 5-0 0-7
RX Power Reserved TX Disable State Soft TX Disable Reserved TX Fault LOS Data_Ready_Bar Reserved Power leveling control Temp High Alarm Temp Low Alarm VCC High Alarm VCC Low Alarm TX Bias High Alarm TX Bias Low Alarm Reserved RX Power High Alarm RX Power Low Alarm Reserved Reserved Temp High Warning Temp Low Warning VCC High Warning VCC Low Warning TX Bias High Warning TX Bias Low Warning Reserved RX Power High Warning RX Power Low Warning Reserved Reserved
XX XX 00 00 00 00 0
XX
00 00 01 10
0 00 for the power levelling mode 0 01 for the power levelling mode 1 10 for the power levelling mode 2
XX
"000000" 00 00
0 0
XX
"000000" 00 00
0 0
Note: The "XX" byte should be filled in according to practical case. For more information, please refer to the related document of SFF-8472 Rev 9.5.
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
Page 13 of 17
SFF GPON ONT Diplexer Class B+ attenuation range: 13-28dB
Document Confidential Level: In public
FTM-9423P(T)-K(F)GH(i)G Preliminary Data Sheet May. 15, 2007
Template ver. 1e
Table 13- Monitoring Specification
Parameter Temperature Voltage Bias Current RX Power Range -40 to 100C 3.0 to 3.6V 0 to 100mA -30 to -4dBm Accuracy 3C 3% 10% 3dB Calibration Internal Internal Internal Internal
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
Page 14 of 17
SFF GPON ONT Diplexer Class B+ attenuation range: 13-28dB
Document Confidential Level: In public
FTM-9423P(T)-K(F)GH(i)G Preliminary Data Sheet May. 15, 2007
Template ver. 1e
Ordering Information
Part No. FTM-9423P-FGHG FTM-9423P-FGHiG FTM-9423P-KGHG FTM-9423P-KGHiG FTM-9423T-FGHG FTM-9423T-FGHiG FTM-9423T-KGHG FTM-9423T-KGHiG Product Description 1310nm(TX)/1490nm(RX), SC/UPC Pigtailed 2x5 SFF for GPON ONT 1244/2488M Class B+ application, 0C ~ 70C, RoHS compliance 1310nm(TX)/1490nm(RX), SC/UPC Pigtailed 2x5 SFF for GPON ONT 1244/2488M Class B+ application, -40C ~ 85C, RoHS compliance 1310nm(TX)/1490nm(RX), SC/UPC Pigtailed 2x10 SFF for GPON ONT 1244/2488M Class B+ application, power levelling supported, 0C ~ 70C, RoHS compliance 1310nm(TX)/1490nm(RX), SC/UPC Pigtailed 2x10 SFF for GPON ONT 1244/2488M Class B+ application, power levelling supported, -40C ~ 85C, RoHS compliance 1310nm(TX)/1490nm(RX), SC/APC Pigtailed 2x5 SFF for GPON ONT 1244/2488M Class B+ application, 0C ~ 70C, RoHS compliance 1310nm(TX)/1490nm(RX), SC/APC Pigtailed 2x5 SFF for GPON ONT 1244/2488M Class B+ application, -40C ~ 85C, RoHS compliance 1310nm(TX)/1490nm(RX), SC/APC Pigtailed 2x10 SFF for GPON ONT 1244/2488M Class B+ application, power levelling supported, 0C ~ 70C, RoHS compliance 1310nm(TX)/1490nm(RX), SC/APC Pigtailed 2x10 SFF for GPON ONT 1244/2488M Class B+ application, power levelling supported, -40C ~ 85C, RoHS compliance
Related Documents
For further information, please refer to the following documents: ITU-T G.984.2 ITU-T G.984.2. Amendment 1
Obtaining Document
You can visit our website: http://www.fiberxon.com/ Or contact with Fiberxon, Inc. America Sales Office listed at the end of documentation to get the latest documents.
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
Page 15 of 17
SFF GPON ONT Diplexer Class B+ attenuation range: 13-28dB
Document Confidential Level: In public
FTM-9423P(T)-K(F)GH(i)G Preliminary Data Sheet May. 15, 2007
Template ver. 1e
Revision History
Reversion Pre 1a Initiate Gary Chen Review Peter Tang Approve Peter Tang Subject Initial datasheet(temporary version) (Doc No. DS0000002-1a) Revised Datasheet Pre.1b Gary Chen Peter Tang Peter Tang 1. 2. Modify the pin definition Update Figure 3 Aug. 7, 2006 Release Date Jul. 7, 2006
(Doc No. DS0000002-1b) Revised Datasheet: Pre.1c Gary Chen Peter Tang Peter Tang 1. Added the module figure 2. Modify the order information Revised Datasheet: 1. Pre.1d Jacob Cai Gary Chen Peter Tang 2. Update the value of overload in Table 4 from -5dBm to -7dBm Delete FTM-9423P(T)-K(F)GHEG. (Doc No. DS0000002-1d) May 15, 2007 Sep. 26, 2006
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
Page 16 of 17
SFF GPON ONT Diplexer Class B+ attenuation range: 13-28dB
Document Confidential Level: In public
FTM-9423P(T)-K(F)GH(i)G Preliminary Data Sheet May. 15, 2007
Template ver. 1e
(c) Copyright Fiberxon Inc. 2007 All Rights Reserved. All information contained in this document is subject to change without notice. The products described in this document are NOT intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. The information contained in this document does not affect or change Fiberxon's product specifications or warranties. Nothing in this document shall operate as an express or implied license or indemnity under the intellectual property rights of Fiberxon or third parties. All information contained in this document was obtained in specific environments, and is presented as an illustration. The results obtained in other operating environment may vary. THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN "AS IS" BASIS. In no event will Fiberxon be liable for damages arising directly from any use of the information contained in this document. Contact U.S.A. Headquarters: 5201 Great America Parkway, Suite 340 Santa Clara, CA 95054 U. S. A. Tel: 408-562-6288 Fax: 408-562-6289 Or visit our website: http://www.fiberxon.com/
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
Page 17 of 17

▲Up To Search▲

Price & Availability of FTM-9423P-KGHG

	To Download FTM-9423P-KGHG Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .